UPSTART Motorcycle Small 12 volt Battery Charging System

Biker's Paradise™ is a compact, inexpensive, safe and multi-functional charger of your motorcycle battery.

With these car-to-motorcycle/motorcycle-to-motorcyclejumper cables tucked under your seat,

These motorcycle jumper cables can also be used to replace laborious, expensive motorcycle trickle chargers.

Just connect them for a few minutes every few weeks and keep your bike charged and road ready. It's equally useful for charging lawnmower batteries.

Also, one of the more useful snowmobile accessories you can find. as well as knowing you have a pair of these handy for your boat!

These jumper cables work with virtually any 12-volt to 12-volt application.

Motorcycle to Motorcycle
Simply connect one end to a well-charged motorcycle battery and the other end to a discharged motorcycle battery. In a brief time, the discharged motorcycle battery is charged enough to start your bike.

Car to Motorcycle
Plug in the cigarette lighter adapter and attach the clips to your motorcycle's battery posts. In no time you'll have your motorcycle maintenanced and your battery recharged. In either configuration, the fuse "monitors" electrical flow for safety when your battery recharger is connected!

This motorcycle maintenance tool makes it easy to get assistance from other drivers-It's easy, fast, convenient, and clean. This tool will not harm your car or bike when used properly. The cables are extremely compact weighing 7.1 ounces and fold to roughly the size of a palm pilot.

The replaceable 3-amp fuse is located inside the cigarette lighter plug on the end of the 8-foot battery recharger cable. To replace a burned out fuse, simply unscrew and remove the end cap and replace the burned out fuse with a new 3-amp fuse. Firmly screw the end cap back in place.

Its that easy!

Patented in the US and Canada

Home Page

Charger Cable Instructions:

CAUTION! This product must NOT be used to charge a car battery. Use common sense when handling the battery clips so they do not contact each other.

To charge a battery from your car's cigarette lighter:

First, be certain that the ignition and all lights and accessories of the car and the unit with the dead battery are "OFF." Next, using the 8 ft. long cable, remove the cigarette lighter and push the male plug of the cable into the cigarette lighter socket of the car. then connect the battery clips to the terminals of the weak battery as follows:

RED (+) Battery clip to the RED (+) terminal
BLACK (-) battery clip to the BLACK (-) terminal

To charge battery from another motorcycle or lawn tractor:

Plug the male plug of the 8 ft. cable into the female socket of the shorter cable. Be certain that the ignition and all lights and accessories of both units are "OFF." connect the battery clips to the terminals of the good battery and the weak battery as follows: RED (+) Battery clip to the RED (+) terminal BLACK (-) battery clip to the BLACK (-) terminal Double check the connections to be certain they are secure. Start the unit with the good battery and allow it to idle. The weak battery is now being charged.

Replacing the 3-Amp Fuse

The replaceable 3-amp fuse is located inside the cigarette lighter plug on the end of the 8 ft. cable. To replace a burned out fuse, simply unscrew and remove the end cap (Part A) and replace the burned out fuse with a new 3-amp fuse. Firmly screw the end cap back in place.

Home Page